 |
|
|
| [Sunday, November 19, 2006] |
| In a retail box store we have VCT with rust on the tiles. I have tried scraping, scouring, and spot removers. ls there anyway to remove the rust without damaging the tile or sanding? |
| Cleaning Procedures - Jeff Van Buren |
|
|
|
|
Most commerical rust removers used by carpet cleaners will do the job. Rust removers will not work unless all finish and sealer has been previously stripped, exposing the rust. Apply to bare floor tile, allow it to set 2 minutes, agitate, and rinse. Repeat if needed. MSDS and personal safety precautions are available from the distributor.
Gary Clipperton
National Pro Clean Corp.
(719) 598-5112
www.nationalproclean.com
|
| ICAN representative |
|
|
